home    layout    Show All Chassis        Show Documents login

Edsac Replica Project - Rack Layout - Rack R2,Power

By clicking on the racks in the left column, you can see up to three racks side by side. Clicking additional ones discards those in the first displayed rack. Note that if it is necessary to swap chassis to a place already occupied you can use the Bench, which should always have at least one free 'shelf'.

Click on rack id to see other racks

F1
F2
F3
F4
M1
M2
M3
R1
R2
R3
R4
R5
Coffin1
Coffin2
Bench
Power
Rack R2

Click on chassis to see more details
PositionNametype/idStatus
14Empty
13Store Regeneration Unit01/29In Rack
12Store Regeneration Unit01/28In Rack
11Store Regeneration Unit01/40In rack
10Store Regeneration Unit01/04In Rack
9Final Tank Decoder04/03In Rack
8Tank Decoder Distributor06/04In Rack
7Tank Decoder Logic05/04In Rack
6Final Tank Decoder04/02In Rack
5Store Regeneration Unit01/37In Rack
4Store Regeneration Unit01/36In Rack
3Store Regeneration Unit01/35In Rack
2Store Regeneration Unit01/34In Rack
1Empty
Rack Wiring (under development)

Rack Power

Click on chassis to see more details
PositionNametype/idStatus
14Empty
13Empty
12Empty
11Empty
10Control Panel106/1in Rack
9Spare0/0in Rack
8DC Metering105/1in Rack
7HT Metering104/1in Rack
6AC Metering103/1in Rack
5DC+HT Protection102/1in Rack
4AC Protection101/1in Rack
3HT PSU 1100/3in Rack
2HT PSU 2100/2in Rack
1HT PSU 3100/3in Rack
0Internal HT Soft Start107/1in Rack
0Power Rack999/1N/A
Rack Wiring (under development)

 

Page maintained by Bill Purvis
page last updated 5th December, 2020
no recent data updates